工作地点：上海，北京（长时间国内外出差）
★.岗位：机器人实习工程师 （应届毕业生）
职位要求：
1、大专及以上学历，电气 /自动化/专业毕业；
2、在校学习C++, PLC编程、调试课程优先
3、在校专业成绩优秀
4、服从工作安排，能够适应在国内、外出差和在压力下工作.
5、良好的沟通协调能力、团队合作精神、工作积极认真负责，有较强的求知欲和学习能力且能承受压力
6、良好的英语应用能力

ABB、KUKA、 FANUC、KAWASAKI 机器人
1、机器人系统的网络组态配置、示教、编程与调试
2、机器人外围设备的控制和参数设置(焊接控制器、焊枪、涂胶机、激光焊机、视觉...)
3、机器人离线仿真程序验证调试
4、点焊、弧焊、搬运、滚边、激光......编程调试

★.岗位：Robot Engineer Simulation / 机器人仿真离线工程师

Robcad,PS(Process Simulation), Delmia仿真离线
Robcad,PS(Process Simulation) , Delmia for simulation
EKS虚拟调试

★.岗位：Robot Engineer / 机器人工程师

岗位要求：1. Can understand hardware construction for robot controller and its slaves and solve problem by himself mostly 能够独立完成硬件组态并解决相关问题;
2. Be familiar with software for commissioning(KUKA, Fanuc, ABB, Motoman, Comau, Nachi etc) 熟悉调试专用软件 (KUKA, Fanuc, ABB, Motoman, Comau, Nachi 等等);
3. Can work independently under the guide from team leader or supervisor on site 能够在指导下独立调试;
4. Be good at English in oral and written 良好的英语口语和书写能力;
5. Good team work spirit and attitude 良好的合作精神和态度;
6. Have good practice ability, the ability to think logically independent 良好的动手能力及独立思考能力；
7. Travel in China or aboard, and work under pressure 能够适应在国内、外出差和在压力下工作.
8. Over 4 years working experience for Robot commissioning 四年及以上机器人调试经验;
9. Working experience in automation field, especially in automotive field 自动化行业工作经验，特别是汽车行业自动化;
10. Working experience for spot/mig/mag welding, handling, hemming etc 有点焊/弧焊/搬运及滚边调试经验.
岗位职责：
1. Make Robot commissioning for spot/mig/mag welding, handling, hemming application 调试机器人的点焊、搬运、滚边等应用 ;
2. Communicate with PLC guy about interface and bus commissioning 与PLC工程师调试通讯接口;
3. Mostly solve hardware and software problem by himself 解决现场出现的硬件及软件问题;
4. Make backup and documentation for customer under the guide from team leader 在指导下完成备份及文档;
5. Standby for ongoing projects 现场陪产.